According to the Cisco IOS documentation, you can select between the original and the universal CEF load sharing algorithm with the ip cef load-sharing algorithm name parameter global configuration command (we'll leave the tunnel algorithm aside for the moment). Of course, they don't tell you what you select.

I had to investigate the details of CEF load sharing for one of my upcoming article and found (yet again) that the details are rather undocumented in official documentation. So, this is how it works (in case you ever need to know):

These tips will help you get the most out of the Cisco IOS embedded web server:

• Home page for a Cisco IOS web server;
• Tar archives used by Cisco IOS web server;
• Multilevel web (HTTP) access to a router;
• Use command aliases to simplify Cisco IOS web server URLs;
• Include a default username/password in web request;
• Use Cisco IOS FTP server to bypass Microsoft "security patch".

If you give your users guest access to a router, you might want to disable some web-based applications the router usually offers (for example, command execution). To do this, use the following steps (first supported in IOS release 12.3(14)T, integrated in 12.4):

I've got a great question related to a previous post:

Is there anyway to send the username and password with the URL request to the router so the user is not prompted for the login?

You can specify username and password as part of standard URL syntax http://username:password@host/rest-of-url, so to execute a show ip interface brief command you could use this URL (after configuring multilevel web access on the router):

http://guest:guest@router/level/1/exec/show/ip/interface/brief

Note: this syntax no longer works in Internet Explorer with latest security patches, please read http://support.microsoft.com/kb/834489 for more information on how to re-enable this behavior.

In some scenarios you want to use true username/password authentication when accessing the router's web server (by default, you have to use enable password). To change the HTTP authentication method, use the ip http authentication local configuration command; it tells the router to use local usernames and passwords when authentication web requests.

Before changing the HTTP authentication, you must define local usernames with the username username privilege-level level password password command, for example:

If you have HTTP enabled on your router, you can use it to automate router reloads through web requests. To enable HTTP on the router, use the following commands:

ip http server
ip http access-class 90
access-list 90 permit network-management-ip-address

The ip http access-class configuration command is vital - it limits the access to the web server on your router to well-defined IP addresses.

The Visual Basic script to reload the router is extremely simple (just save the following lines into a file called reload.vbs):

If you're still stuck with frame-relay connections (or use them in test environment, because it's easy to set up any-to-any connectivity between a larger number of routers), you were probably used to subinterface logging events reporting when the line protocol on a point-to-point subinterface would go up or down based on LMI DLCI status.

Very quietly, these logging events disappeared, first on 7500-series routers in IOS release 12.1(14), now they're gone by default on all platforms. If you still want to see what's going on with your frame-relay subinterfaces, you have to enter logging event subif-link-status configuration command on every subinterface.

Sometimes when using not-so-very stable IOS versions, periodic reload of a router during a non-peak (or idle) period is a good idea that can significantly increase the overall stability of your network. Until release 12.4, you had to write an external script that would log into the router and execute the reload command.

With the Embedded Event Manager, the task is surprisingly simple - just enter the following configuration commands to reload the box every midnight (of course it helps if your router is NTP-synchronized to a reliable clock source and has correctly configured time zone).

In IOS release 12.3, most Cisco routers can act as primary DNS servers (formerly, this functionality was only available as part of DistributedDirector product), alleviating the need for a host-based DNS server in your perimeter network. To configure a router to act as primary DNS server for a zone, use the ip dns primary command, for example:

ip dns server
ip dns primary website.com soa ns.website.com
admin@website.com 86400 3600 1209600 86400