Category: Fabric

During Shawn Zandi’s presentation describing large-scale leaf-and-spine fabrics I got into an interesting conversation with an attendee that claimed it might be simpler to replace parts of a large fabric with large chassis switches (largest boxes offered by multiple vendors support up to 576 40GE or even 100GE ports).

As always, you have to decide between implicit and explicit complexity.

The work of editing transcripts of my two switches presentation is (very slowly) moving forward. In the fourth part of the Optimize Your Data Center Infrastructure series I’m talking about reducing the number of uplinks.

Wondering how exactly routing on hosts works? Dinesh Dutt explained the details in this 10-minute video during the Leaf-and-Spine Fabric Designs webinar.

I published the third installment of the Optimize Your Data Center Infrastructure story on my main web site. In this part I’m telling you to go with 10GE and consider 25GE.

I recently finished editing the videos from the Leaf-and-Spine Designs update to the Leaf-and-Spine Fabrics webinar, so it wasn’t hard to select the featured webinar for April 2017. The featured videos now include BGP in the Data Center by Dinesh Dutt, SPB Deep Dive by Roger Lapuh, and VXLAN with EVPN control plane by Lukas Krattiger.

Lukas Krattiger (Cisco Systems) was the guest speaker in Layer-2+3 fabrics part of the Leaf-and-Spine Fabric Design webinar, and he started his presentation with an overview of how we use overlays in data center fabrics.

During the Leaf-and-Spine Fabric Designs webinar Roger Lapuh from Avaya explained how Avaya uses SPB technology to build an L2+L3 fabric.

One of my readers watched my Leaf-and-Spine Fabric Architectures webinar and had a follow-up question:

You mentioned 3-tier architecture was dictated primarily by port count and throughput limits. I can understand that port density was a problem, but can you elaborate why the throughput is also a limitation? Do you mean that core switch like 6500 also not suitable to build a 2-tier network in term of throughput?

As always, the short answer is it depends, in this case on your access port count and bandwidth requirements.

One of my readers wondered what the difference between fabric extenders and leaf-and-spine fabrics is:

We are building a new data center for DR and we management is wanting me to put in recommendations to either stick with our current Cisco 7k to 2k ToR FEX solution, or prepare for what seems to be the future of DC in that spine leaf architecture.

Let’s start with “what is leaf-and-spine architecture?”

Cumulus Linux 3.2 shipped with a rudimentary EVPN implementation and everyone got really excited, including smaller ASIC manufacturers that finally got a control plane for their hardware VTEP functionality.

However, while it’s nice to have EVPN support in Cumulus Linux, the claims of its benefits are sometimes greatly exaggerated.